Tungsten Alloy Plate
Tungsten alloy plates are refractory metal, which have two-phase composites consisting of W-
Ni- Fe or W-Ni- Cu or even W-Ni-Cu-Fe, some tungsten alloys also contain Co、Mo、Cr, etc. Tungsten alloy can be machined into various shapes, such as rods, cubes, blocks, bricks, rings, plates, etc.
Applications for Tungsten Alloy Plate:
1) Sports goods: Professional tungsten alloy plate for darts benchmarking. The to fall series: the bullet type, type water, pipe type, half water droplets type, type cylinder have.
2) Counterweight products: High-density tungsten alloy plates with counterweight series: with the balance of mechanical hammer; Fly hammer; Oil drilling counterweight rod; Darts rod; Golf counterweight piece; The car counterweight piece; mobile phones, game oscillator; aerospace the gyroscope; The pendulum clocks; counterweight balance ball; Shockproof tool rod.
4) Electrical material: electrical discharge machining of electrode and resistance welding electrode; high proportion electrical contacts, air circuit breaker in the contacts.
5) High temperature alloy heat sink: due to high temperature resistant and good thermal performance, electronics industry isswitching to tungsten alloy plates as heat sink materials.
Tungsten Alloy Plate Introduction
1, Width*Length: (2.0-250.0mm)*(2.0-250.0mm)
2, Thickness: 2mm-15mm
3, Density: 15.8-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
Tungsten alloy plates are produced by good processing property billets and special cold and hot rolling technology; they can be used to make tungsten target, tungsten heat elements, tungsten radiation shields and tungsten boats for electronics, lightening, electro-vacuum industries.
Tungsten alloy plates play very important role in manufacturing of collimator for nuclear medicine, nuclear research, geologging and homeland security. These materials provide reliable protection against X-rays and gamma radiation.
The thickness of the tungsten alloy plate is as follows:
Foil - a thickness of less than 0.005 in. (0.13 mm).
Plate - thickness greater than or equal to 0.188 inches (4.75 mm).
Sheet - thickness less than or equal to 0.187 inches (4.75 mm) to greater than or equal to 0.005 inches (0.13 mm)
If you have any interest in tungsten alloy plate, please feel free to contact us by email: firstname.lastname@example.org or by telephone:00 86 13215340999.